Technical Specifications
Click here to download PDF Format

Flexible Eastomeric Foam Insulation

 
AVERAGE PHYSICAL PROPERTIES
RATING
TEST METHODS
Density
0.08 - 0.12 gm/cm3
( 5 - 8 lb/cuft )
ASTM D 1667
 
Thermal Conductivity at 20°C  
  mean temp.
0.0374 W/mK
(0.26BTU.in/hr.ft2. °F)
ASTM C 177
 
Temperature Limits °C
-40°C to +105°C
 
Water Absorption
0.27%(By Volume)
3%(By Weight)
ASTM D 1056
Water Vapour Diffusion Resistance Factor
>5000
DIN 52615
Ozone Resistance
Excellent
 
Thermal Stability 7 days
(% shrinkage) 200°F
  7 days
  220°F
4.5
 
5.5
 
ASTM C 548
 
 
 
Average time of burning
Flexibility
Weather and Ultraviolet Rays
Resistance
CLASS 0
CLASS 1
Less than 5 seconds
Excellent
BS 476 PART 6
BS 476 PART 7
ASTM D 635 - 91
 
Ozone(UV) Resistance And Weather Resistance
Excellent
50pphm/72hrs/40 C
ASTM D 1171
Vertical Burning Test for Flammability of Materials
Within range of UL test requirements
UL 94 (V-0)
(Under writers Laboratories Inc.)
Smoke Density Rating
Within Limits
ASTM D 2843
Evolved Gas During Burning
No Halogen and Nit rosamine Detected
DIN 5346
Noise reduction (Noise Absorption)
NRC 0.14
AS 1045-1988
Oil and Grease Resistance
Excellent
 
Toxicity - Heavy Metals
Not Detected
USEPA 3052 ICP-OES
Elongation, Tensile And Flexibility
Excellent
 
Chemical Resistance
Excellent
 
Odour
Negligible
 
Electricity Conductance
No
 
Surface and Physical Properties
Tuff Skin
Not easy broken/torn
 
Mildew Resistance
Not Fungal Growth
 
 
  • The above average physical properties are values obtained in accordance with accepted test methods.
     
  • At -40°C, Insulflex Closed Cell Insulation becomes hard and as temperature drops below -40°C will be increasingly brittle; however this hardening chracteristic does not affect thermal or water vapour permeability.
     
  • The Fire rating standard method of tests conducted under controlled laboratory conditions is a measure of a material to spread flame when compared to a known standard and is not intended to reflect hazards presented by this or any material under actual fire conditions.
     
 
 
 
 
 
 
WORKING HOUR:
Mon~Fri : 0830 - 1730
 
SALES OFFICE ADDRESS :
Insulflex Corporation Sdn Bhd
Lot 6&8, Jalan P/1,
Kawasan Perusahaan Bangi 43650, Bandar Baru Bangi,
Selangor Darul Ehsan Malaysia.
TEL :+603 8925 7197 / 7198
FAX :+603 8925 1012
 
FACTORY ADDRESS :
Insulflex Corporation Sdn Bhd
Lot 6&8, Jalan P/1,
Kawasan Perusahaan Bangi 43650, Bandar Baru Bangi,
Selangor Darul Ehsan Malaysia.
TEL :+603 8925 7197
FAX :+603 8926 3085
 
EMAIL : info@insulflex.com.my WEBSITE : www.insulflex.com.my